Seat Heater; Lumbar Support; Backrest Adjustment - Grammer AVENTO PRO M 630 2P Mode D'emploi

* if fitted ** optional extra
764
1
0
2
1
2
765
***depending on model
Seat functions and operation

Seat heater * **

The seat heater can be turned on/off by
pressing the switch.
1 = seat heater OFF
2 = seat heater ON

Lumbar support *

The lumbar support increases both the
seating comfort and the performance of the
driver.
By turning the adjustment knob upwards, the
curvature in the upper part of the backrest
cushion can be adjusted. By turning the knob
downwards, the curvature in the lower part of
the backrest cushion can be adjusted.
0 = No curvature
1 = Max. curvature at the top
2 = Max. curvature at the bottom.

Backrest adjustment ***

Pull up the locking lever to release the
backrest catch. For seats with narrow seat
cushions, a loop should be pulled upwards to
unlock the backrest.
When releasing the backrest catch, do not
apply load to the backrest by pressing against
it.
By exerting pressure on or off the front or rear
part of the seat pan it can be moved to the
desired position. Release the locking lever to
lock the backrest.

It should not be possible to move the
backrest into another position after it has
been locked.
When the backrest is folded forward,
fluted metal locking devices on either side –
left and/or right – protrude from the bottom of
the backrest and, during the adjustment
procedure, can cause shearing and crushing
of the body of the person performing this task.
– DO NOT REACH INTO THIS DANGER
ZONE –
23