Kettler UNIX 2 Instructions De Montage page 2

– EN – Important Instructions
Please read these instructions carefully prior to carrying out assembly and using for the first time. They contain infor-
mation which is important for your safety as well as for the use and maintenance of the appliance. Keep these in-
structions in a safe place for reference purposes, maintenance work and to assist you when ordering spare parts.
For Your Safety
! RISK!
While assembly of the product keep off children's reach
(Choking hazard - contains small parts).
!
RISK! The device requires a supply voltage of 230V, 50 Hz. –
Connect the power cord with a grounded protective contact
socket.
! RISK!
Any other use of the equipment is prohibited and may be
dangerous. The manufacturer cannot be held liable for damage
or injury caused by improper use of the equipment.
! RISK!
Instruct people using the equipment (in particular child-
ren) on possible sources of danger during exercising.
! RISK!
Do not under any circumstances carry out electrical re-
pairs or alterations yourself. Always ensure that such work is
done by a properly qualified electrician.
! RISK!
disconnect the apparatus from the mains before doing re-
pair, maintenance or cleaning work.
! RISK!
Incorrect repairs and structural modifications (e.g. re-
moval or replacement of original parts) may endanger the sa-
fety of the user.
! RISK!
Heart rate monitoring systems may be inaccurate. Over
exercise may result in serious injury or death. If you feel faint
stop exercising immediately.
! RISK!
All electric appliances emit electromagnetic radiation
when in operation. Please do not leave especially radiation-in-
tensive appliances (e.g. mobile telephones) directly next to the
cockpit or the electronic controlsystem as otherwise values dis-
played might be distorted (e.g. pulse measurement.
! RISK!
Ensure that the power cable is not pinched and that no-
one can trip over it.
! WARNING!
The training device should be used only for its in-
tended purpose, i.e. for physical exercise by adult people.
! WARNING!
Before beginning your program of training, study
the instructions for training carefully.
! WARNING!
Any interference with parts of the product that are
not described within the manual may cause damage, or en-
danger the person using this machine. Extensive repairs must
only be carried out by KETTLER service staff or qualified per-
sonnel trained by KETTLER.
! WARNING!
This training device is for home use only.
■
The training device has been designed in accordance with the
latest standards of safety. Any features which may have been
a possible cause of injury have been avoided or made as safe
as possible.
■
In case of enquiry, please contact your KETTLER dealer.
■
If the equipment is in regular use, check all its components
thoroughly every 1–2 months. Pay particular attention to the
tightness of bolts and nuts. This is particularly true for the attach-
ment of grip strap, running plate and fastening of the handlebar
and front tube.
Instructions for Assembly
! RISK!
Ensure that your working area is free of possible sources
of danger, for example don't leave any tools lying around. Al-
4
■
Before beginning your program of exercise, consult your doc-
tor to ensure that you are fit enough to use the equipment. Base
your program of exercise on the advice given by your doctor.
Incorrect or excessive exercise may damage your health!
■
Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.
■
Always wear suitable shoes when using.
■
Our products are subject to a constant innovative quality assu-
rance. We reserve the right to perform technical modifications.
■
The location for the device must be selected such that a sufficient
and safe distance from any obstacles is maintained. In the im-
mediate vicinity of the main operational directions, nothing else
should be placed. There should be at least one meter of free
space surrounding the exercise space.
Make sure that no one, other than the person who is training,
is in the device space when the device is in motion.
■
Always observe the general safety rules and precautions for
working with electrical equipment.
■
Do not use a multiple power socket for the running belt. If an ex-
tension cable is being used, ensure that it complies with the
VDE regulations.
■
Unplug the power cord of the device from the socket if not used
for a longer period.
■
Nobody may be in the moving range of a training person du-
ring training
■
This exercise machine may only be used for exercises indicated
in the training instructions.
■
This training device has to be set up on a horizontal surface
under all circumstances. Place rubber or straw mats under it to
deaden any noise or impacts. Only for appliances with weights.
Avoid powerful oscillations of the dumbbells!
■
When mounting the product please take the recommended tor-
que information into account (
07692-200 UNIX 2 / 07692-400 UNIX 4
■
The training device corresponds with DIN EN ISO 20957-
1/DIN EN 957-9, class HB. It is therefore unsuitable for thera-
peutic use.
07692-500 UNIX 10
■
The training device corresponds with DIN EN ISO 20957-
1/DIN EN 957-9, class HA. It is therefore suitable for thera-
peutic use.
07692-400 UNIX 4 / 07692-500 UNIX 10
! WARNING!
If you lose the pulse signal, the performance of
the device will remain constant for approx. 60 seconds and is
then slowly adjusted downwards. Please check your pulse mea-
suring system (ear clip, hand pulse or chest belt) so that the
pulse signal of the electronics can be entered again.
ways dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if child-
ren play with plastic bags!
= xx Nm).