Rating Plate Information; Mobile Home Installation - Napoleon STARfire Serie Mode D'emploi

Masquer les pouces Voir aussi pour STARfire Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1.2

rating plate information

Certified to Canadian and American National Standards: CSA 2.22-XXXX / ANSI Z21.50-XXXX for Vented Decorative Gas Appliances
Certifié selon les normes Nationales Canadiennes et Américaines: CSA 2.22-XXXX / ANSI Z21.50-XXXX pour les Appareils à gaz décoratif à évacuation
Direct vent, vented gas fireplaces. Approved for bedroom, bathroom and bed-sitting room installation. Suitable for mobile home installation, if installed in accordance with the current
standard CAN / CSA Z240MH Series gas equipped mobile homes in Canada, or, in the United States, the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part
3280. When this US Standard is not applicable, use the Standard for Fire Safety Criteria for Manufactured Home Installations, Sites and Communities, ANSI / NFPA 501A. This appliance
must be installed in accordance with local codes, if any; if none, follow the current ANSI Z223.1 or CSA B149. For use with barrier WXXX-XXXX. Follow installation instructions.
Foyer à gaz ventilé. Homologué pour installation dans une chambre à coucher, une salle de bain et un studio. Approprié pour installation dans une maison mobile si son installation
conforme aux exigences de la norme CAN / CSA Z240MH Séries de maisons mobile équipées au gaz en vigueur au Canada, ou, aux États-Unis selon la norme 24 CFR, Part 3280,
Manufactured Home Construction and Safety Standard. Dans le cas ou cette norme d'États-Unis n'est pas pertinentes, utiliser la norme NFPA 501A, Fire Safety Criteria for Manufactured
Home Installations, Sites and Communities. Installer l'appareil selon les codes ou règlements locaux ou, en l'absence de tels règlements, selon les codes d'installation ANSI Z223.1 ou
CSA B149 en vigueur. Utiliser uniquement avec l'écran WXXX-XXXX. Suivre les instructions d'installation.
9700539 (WSL)
4001658 (NAC)
XXXX
XXXX
XXXX
XXXX
Altitude
Input
XX,XXX
XX,XXX
Reduced Input
XX.X%
P4
Manifold Pressure: 3.5" w.c. (NG)
Minimum Supply Pressure: 4.5" w.c. (NG)
Maximum Supply Pressure: 7"* w.c. (NG)
Pression au Collecteur: 3,5" d'une colonne d'eau (GN)
Pression d'Alimentation Min.: 4,5" d'une colonne d'eau (GN)
Pression d'Alimentation Max.: 7" ** d'une colonne d'eau (GN)
** Maximum inlet pressure not to exceed 13".
Minimum clearance to combustible materials:
Top, sides & back: per standoff spacers for framing and finishing
ers for framing and finishing
s for framing and finishing
materials. For non-combustible framing and finishing materials,
framing and finishing materials,
framing and finishing materials,
see installation manual.
Top X"
Floor X"
Sides X"
Back X"
Vent top X"
Vent sides & bottom X"
Recessed depth X"
*** Mantel X" from appliance opening
pening
ning
*** Maximum horizontal extension:
l extension:
l extension:
X". See installation manual for
ual for
al for
greater extensions, minimum vent
um vent
m vent
lengths and maximum vent lengths.
lengths.
Electrical rating: 115V, 60HZ. Less than 12 amperes.
L
WOLF STEEL LTD.
This illustration is for reference only. Refer to the rating plate on the appliance for accurate information.
note:
The rating plate must remain with the appliance at all times. It must not be removed.
1.3

mobile home installation

This appliance must be installed in accordance with the manufacturer's instructions and the Manufactured
Home Construction and Safety Standard, Title 24 CFR, Part 3280, in the United States or the Mobile Home
Standard, CAN/CSA Z240 MH Series, in Canada. This appliance is only for use with the type(s) of gas
indicated on the rating plate.
This mobile/manufactured home listed appliance comes factory equipped with a means to secure the appliance. Built
in appliances are equipped with 1/4" (6.4mm) diameter holes located in the front left and right corners of the base.
Use appropriate fasteners, inserted through the holes in the base to secure. For free standing products contact your
local authorized dealer / distributor for the appropriate securing kit. For mobile home installations, the appliance must
be fastened in place. It is recommended that the appliance be secured in all installations. Always turn off the pilot and
the fuel supply at the source, prior to moving the mobile home. After moving the mobile home and prior to lighting the
appliance, ensure that the logs are positioned correctly.
This appliance is certifi ed to be installed in an aftermarket permanently located, manufactured (mobile) home,
where not prohibited by local codes.
This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible
for use with other gases, unless a certifi ed kit is used.
Conversion Kits
This appliance is fi eld convertible between Natural Gas (NG) and Propane (P).
To convert from one gas to another, consult your Authorized dealer/distributor.
4001657 (NGZ)
4001659 (WUSA)
MODEL / MODÈLE
XXXX
XXXX
0-XXXXft (0-XXXXm)
XX,XXX
XX,XXX
XX.X%
Manifold Pressure: 10" w.c. (P)
Manifold Pressure:
fold Pressure: 10" w.c. (P)
Minimum Supply Pressure: 11" w.c. (P)
Minimum Supply Pressure: 11" w.c. (P)
Minimum Supply Pressure:
Maximum Supply Pressure: 13"* w.c. (P)
Maximum Supply Pressure:
Maximum Supply Pressure: 13"* w.c. (P)
Pression au Collecteur:
Pression au Collecteur: 10" d'une colonne d'eau (P)
sion au Collecteu 10" d'une colonne d'eau (P)
GN) N)
Pression d'Alimentation Min.:
Pression d'Alimentation Min.: 11" d'une colonne d'eau (P)
Alimentation Min.: 11" d'une colonne d'eau (P)
'eau (GN)
(GN)
Pression d'Alimentation Max.:
Pression d'Alimentation Max.: 13" * d'une colonne d'eau (P)
Pression d'Alimentation Max.: 13" * d'une colonne d'eau (P)
13" * d'une colonne d'ea
** Pression d'alimentation maximale ne devait pas dépasser 13".
** Pression d'alimentation maximale ne devait pas dépasser 13".
** Pression d'alimentation maximale ne devait pas dépasser 1
erials:
Dégagements minimaux des matériaux combus
Dégagements minimaux des matériaux combusti
Dégagements minimaux des matériaux combustibles:
Dessus, côtés et arrière: selon les espaceurs de dégagements
Dessus, côtés et arrière: selon les espaceurs
Dessus, côtés et arrière: selon les espaceurs de dég
pour les matériaux d'ossature selon le manuel du propriétaire
pour les matériaux d'ossature selon le manue
our les matériaux d'ossature selon le man
pour les
pour les matériaux de finition.
Dessus du conduit d'évent X"
Côtés et dessous du conduit d'évent X"
Profondeur d'encastré une face X"
*** Tablette X" de l'ouverture de l'appareil
*** L'extension horizontale maximale: X".
Référez au manuel d'installation pour des
extensions plus grandes, les longueurs
d'évacuation minimaux et maximum.
Spécifications électriques: 115V, 60HZ. Moins de 12 ampère.
24 Napoleon Road, Barrie, ON, L4M 0G8 Canada
general information
4 CFR, Part 3280,
afety Criteria for Manufactured
es d'installation ANSI Z223.1 ou
VENTED DECORATIVE GAS APPLIANCE: NOT A SOURCE OF
NTED DECORATIVE GAS APPLIANCE: NOT A
DECORATIVE GAS APPLIANCE: NOT A
HEAT, NOT INTENDED FOR USE AS
HEAT, NOT INTENDED FOR USE AS
HEAT, NOT INTENDED FOR USE AS A HEATING
XXXX
APPLIANCE, NOT FOR USE W
APPLIANCE, NOT FOR USE WIT
APPLIANCE, NOT FOR USE WITH SOLID FUEL.
XXXX
XX
APPAREIL À GAZ DÉCORATIF À ÉVAC
APPAREIL À GAZ DÉCORATIF À ÉVACUATION: N'EST PAS
PPAREIL À GAZ DÉCORATIF À ÉVA
Élévation
Élévation
Élévatio
UNE SOURCE DE CHALEUR; N'EST PAS DESTINÉ À ÈTRE
UNE SOURCE DE CHALEUR; N
UNE SOURCE DE CHALEUR
Alimentation
Alimentation
mentation
Alimentation Réduite
Alimentation Réduite
Alimentation Réduite
UTILISÉ COMME U
UTILISÉ COMME UN
UTILISÉ COMME UN APPAREIL DE CHAUFFAGE; NE
P4
P4
P4
w.c. (P)
CONVIENT PAS AUX COMBUSTIBLES SOLIDES.
CONVIEN
VIE
11" w.c. (P)
FO
FOR USE WITH GLASS DOORS CERTIFIED WITH THIS APPLIANCE ONLY.
FOR USE WITH G
13"* w.c. (P)
POU
POUR UTILISATION UNIQUEMENT AVEC LES PORTES EN VERRE
0" d'une colonne d'eau (P)
" d'une colonne d'eau (P)
Convient au gaz naturel quand l'appareil est muni d'un injecteur de diamètre no. XX.
Convient au propane quand l'appareil est muni d'un injecteur de diamètre no. XX.
WARNING
:
Do not add any material to the appliance which will come in contact with the
flames, other than that supplied by the manufacturer with the appliance.
Dessus X"
AVERTISSEMENT
Plancher X"
:
Côtés X"
contact avec les flammes autre que celui qui est fourni avec cet appareil par le fabricant.
Arrière X"
The appliance must be vented using the appropriate Napoleon vent kits. See installation
manual for venting specifications. Proper reinstallation and resealing is necessary after servicing
L'appareil doit être ventilé à l'aide de l'ensemble d'évacuation propre à Napoleon. Référez au
manuel d'installation pour les spécifications d'évacuation. Il est nécessaire de bien réinstaller et
resceller l'évacuation après avoir executer l'entretien du système de prise d'air.
Serial Number / N° de Série:
pliance
ance
ructions.
uctions.
installation
stallation
art 3280,
Manufactu
223.1 ou
REFERENCE# 161746
R
CERTIFIÉES AVEC L'APPAREIL.
For natural gas when equipped with No. XX drill size orifice.
For propane when equipped with No. XX drill size orifice.
N'ajoutez pas à cet appareil aucun matériau devant entretien
the vent-air intake system.
XXXX
W385-XXXX
W415-2372 / A / 11.14.19
EN
7

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Starfire hdx35ntStarfire hdx35pt

Table des Matières