Télécharger Imprimer la page

Antar AT51031 Mode D'emploi page 9

Publicité

Les langues disponibles

Les langues disponibles

1. Remove the packing. The rollator is folded.
2. Unfold the rollator, push the seat
down on both sides - Fig. 4.
NOTE: Both sides must be locked in an
appropriate position with the audible
"click".
3. Hang up the bag.
HEIGHTSETTING:
Appropriate adaptation:
Before using the rollator for the first time, make sure that it is fully folded and that the frame is
properly locked and stiff. It is important to adjust the height of the rollator correctly to a
comfortable position.
1. For this purpose, leave your hands hanging on the sides and adjust the handles of the
rollators at the height of the wrists.
2. When gripging the handles, the elbows should be bent at an angle of 150-20°.
3. Are you forced to tilt or raise your arms to reach the rollator, correct the height.
4. To do this, turn the wing shudder out and adjust the handle at the correct height. Repeat the
activity on the other side of the rollator and check before use that both handles are at the
same height and properly locked.
HINT: To determine the correct height of the
rollator, contact the doctor or retailer.
Press here
Abb. 4

Publicité

loading