Explanation Of Terms - Assa Abloy effeff ePED 1386S00 Manuel D'utilisation

Term
Activation delay
Release delay
Hi-O Technology™
bus
Hi-O group
Notes

Explanation of terms

Description
With Activation delay, the key must be turned and held for longer than the
adjusted delay time for unlocking, etc.
The Release delay is the wait time until the escape door is unlocked after
actuation of the Emergency Open push-button.
The Hi-O Technology™ bus (Highly Intelligent Opening) is a bus for the con-
nection of electronic components (devices) in door systems. It is used for the
control of a door in each case. The status monitoring and exchange of informa-
tion between the individual devices takes place via CAN bus.
A central logic controller can be omitted, because each device has its own con-
trol unit. For escape route technology, it is a closed system with permanently
assigned bus addresses.
All devices are interconnected via four-core cables. Conventional devices can
be connected via I/O boxes. Integration into a building network (Ethernet) or
the interaction of multiple doors takes place via a gateway (e.g. an Ethernet
gateway).
Assignment to a Hi-O group offers the possibility of organising components
into groups. The Hi-O group switches are basically set to position 0 (Off) for the
ePED ® 1386-00 door terminal.
39
EN