SAF SAFOR MR 160 Mode D'emploi page 29

leaping Ille works Ille
an in terior ;vire guide sheath
a 0.8 and 0.6 contact tube.
a 0.8 and 0.6 wire guide.
111 (bnitect the Matnig 201 torch Io the central coupling
I 21 Screw up the torch securing handwheel
/3/ Set tue Off-0-on -I- switch ont() 1
141 Press on the torch tirgger. Pull a few centitnetres
of wire out of the nose of the T. 21 torch
15/ Screw in the contact tube corresponding to the wire dia.
16/ Install the nozzle
Nozzle A • Continuous or sequential welding
Nozzle B - Spot welding.
Mantig 201 torch isequipped with :
19