AEG SR 4357 BT Mode D'emploi page 39

Press three times = all music titles are repeated continu-
ously (the symbol "
display).
Press four times = all the functions are deactivated.
Playback is continued normally.
• Keep the button pressed while playing back an MP3 file.
The current folder will appear in the display (e.g. F01).
Use the SKIP-/SKIP+ buttons to select another folder. The
music in the selected folder is played back.
Programmed Play
This can be used to program any desired sequence of tracks.
1. Press the STOP/M+ button (12).
2. Press the MODE/MEM/FOLDER button (9). "P01"
(Storage space) and the notification "P" will appear in
the display. Use the SKIP+/SKIP- buttons (6) to select the
desired track and then press the MODE/MEM/FOLDER
button again. The display changes to memory slot P02.
3. Select the next track with the SKIP+/SKIP- buttons and
press the MODE/MEM/FOLDER button again. Repeat
the procedure until all the desired tracks are selected.
NOTE:
Once the storage capacity of the tracks to be pro-
grammed has been reached "FUL" flashes in the
display.
4. Press the PLAY/PAUSE button (10). The playback starts.
The notification "P" will appear additionally in the display.
5. Press once the STOP/M+ button to stop the playback
while retaining the program.
6. To play the programme back again, press the PLAY/
PAUSE button.
7. To delete the program, press the STOP/M+ button twice.
The notification "P" will disappear.
The device stops automatically after all programmed titles
have been played. The programmed sequence remains in
the memory.
Playing back Music in MP3 Format
With this device it is possible to play back pieces of music in
MP3 format. The device also supports all standard CD types:
CD, CD-RW, CD-R.
This machine of is able to play MP3 CDs. Up to 200 tracks
can be compressed and stored on these CDs. Your machine
detects an MP3 CD automatically (the total number of tracks
and MP3s appears in the display). If you would like to play
one of these CDs, proceed as described under "Playing
CDs/MP3". Tracks can be programmed as described under
"Playing Back Programmed Tracks".
All manuals and user guides at all-guides.com
Please note:
There are a number of different recording and compression
" is lit in the
methods, as well as quality differences between CDs and self-
recorded CDs.
Furthermore, the music industry does not adhere to fixed
standards (copy protection).
For these reasons it is possible that in rare cases there are
problems with the playback of CDs and MP3 CDs. This is not
a malfunction of the device.
AUX IN socket
To connect analogue replay devices. Via this socket you can
also hear the sound of other playback devices such as MP3
players, CD players etc. through the loudspeakers.
1. Please connect the external device with a 3.5 mm stereo
2. Repeatedly press the POWER/SOURCE button (11), until
3. You will hear the sound playback from the external device
4. For the remaining procedure please see the operating
Adjust the volume of the external device to a comfortable
level.
Cleaning and Maintenance
Do not immerse the device in water.
• Always remove the mains plug before cleaning the
• Any marks on the surface can be wiped off with a slightly
Troubleshooting
Symptoms
CD can not be
played back.
CD jumps dur-
ing playback.
jack plug to the AUX-IN socket.
"AUX" is shown in the display.
through the loudspeakers. You may adjust the volume
with VOL-/VOL+ (6). The CD buttons are not functional.
instructions of the external sound source.
NOTE:
WARNING:
machine.
damp cloth without any additives.
Course
CD is not inserted
or inserted incor-
rectly.
Batteries too weak. Insert new batteries
Check the disc for
fingerprints, dirt or
scratches.
English
39
Solution
Ensure that the disc is
inserted with the label
facing upwards.
or operate the device
with the mains lead.
Check the disc for
fingerprints, dirt or
scratches.