AEG SR 4357 BT Mode D'emploi page 38

English
38
NOTE:
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. However,
the sound is not played back by the device. After you
have ended the call, the devices are connected to each
other again and playback continues.
USB ports
The device has two USB ports. Music files may be played
through one port, and you may use the second one to
charge your smartphone.
Playing music via USB (13)
This device has been developed in line with the latest techni-
cal advances in the USB field. The wide range of different
USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full com-
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back files from USB
storage devices. This is not a malfunction of the device.
1. Press the POWER/SOURCE button (11) repeatedly until
"USB" is shown on the display.
2. Connect a USB storage device directly into the port.
Playback will automatically start after a few seconds.
For operation, please refer to the section "Description of the
control buttons".
NOTE:
• Always directly connect a USB storage medium to the
USB port to prevent any malfunctions.
• The USB port is not designed for charging external
devices.
CAUTION:
Switch the device to a different operating mode before you
remove the USB storage device.
USB charging port (5)
You may use this port to charge your smartphone. The device
will provide 1 A during operation with the mains cable. Use
the USB cable of your smartphone for the connection.
All manuals and user guides at all-guides.com
• Due to the different types of smartphones offered
• Playback of audio files through this port is not possible.
Description of the control buttons
Not all the functions may be supported depending on the
playback device.
PLAY/PAUSE (10)
You can briefly interrupt and resume playback using this but-
ton. The symbol "
continues playback.
SKIP+/SKIP- (6)
With SKIP+ you can jump to the next or previous track etc.
• If the button is kept pressed down, the machine starts to
The SKIP- button can be used as follows:
Press once
Press twice
Press three times = This plays the song before etc. If the but-
STOP/M+ (12)
The playback is stopped.
MODE/MEM/FOLDER (9)
• In stop mode for programming any order of tracks (see
During the playback of an audio CD:
Press once
Press twice
Press three times = all functions are cancelled. The normal
During playback of MP3 music:
Press once = the current track is repeated continuously. The
Press twice = the selected folder is repeated continuously
NOTE:
nowadays, and their different charging capacities, the
charging duration depends on the smartphone used
and its operating condition.
NOTE:
" will flash in the display. Pressing again
search through the tracks.
= This starts the current track again from
the beginning. (Only with Bluetoothh
operation)
= his jumps back to the previous track.
ton is kept pressed down, the machine
starts to search through the tracks.
the section on "Programmed Play").
= the current track is repeated continu-
ously. The symbol "
display.
= the whole CD is played continuously.
The symbol "
play mode is resumed.
symbol " " will flash in the display.
( FOLDER appears in the display).
" will flash in the
" is lit in the display.