LEM ISO plus Manuel D'utilisation page 16

Basic operation

Select the voltage measurement function by turning the rotary switch to the
V position
€
Connect test leads to the voltage source – the instrument displays the True
RMS value and the frequency of any AC component

Pressing the key cycles the display through the AC / DC components
of the voltage. The bargraph always shows the True RMS (AC+DC) value
ƒ
To activate the LIMIT (alarm) function press the
limit press the key again and use the
the key to increment the digit. When in this mode pressing the
first turns the lower limit value off completely.
„
To set the higher limit press the
…
To activate the LIMIT function press the
To deactivate the LIMIT (alarm) function turn the rotary switch to a new
position.
key. To set the lower
to selects the digit and
key and use the arrow keys as above.
key again.
- 16 -