Dremel MS20 Consignes De Fonctionnement/Sécurité page 17

DM 2610Z03287 05-13_DM 2610Z03287 05-13.qxp 5/24/13 8:09 AM Page 17
Use only Dremel Moto-Saw blades. Use the right blade size, style and
W RNING
cutting speed for the material and the type of cut. Using the proper blade
minimizes the risk of breakage.
Teeth on Moto-Saw blades wear out and
must be replaced frequently for best cutting
results.
Moto-Saw blades are intended to stay sharp
for ½ hour to 2 hours of cutting.
Blade life depends on the material being cut,
thickness, blade type and the user.
Users can shorten the life of the blade by
pushing too hard when cutting.
Moto-Saw Blades
MS51 General Wood & Plastic Blade
Intended for making straight and larger
diameter curved cuts in materials such as
soft wood, laminate and plastics.
Moto-Saw Accessories
MS52 Fine Wood Cutting Blade
Intended for makng straight and smaller
diameter intricate curved cuts in materials
such as soft wood, laminate and plastics.
MS53 Metal Cutting Blade
Intended for making straight and curved cuts
in soft sheet metal.
MS50 Side Cutting Blade
Intended for making long straight and curved
cuts in larger pieces of soft wood and plastic
materials.
17