Publicité
Les langues disponibles
Les langues disponibles
ROUTINE MAINTENANCE
To guarantee optimal performances from ROBÒ, complete the single routine maintenance operations listed
in this chapter.
The maintenance intervals listed in the table are subject to change in relation to the type of domestic
environment, the presence of pet animals and how frequently the robot is used.
INDICATIVE ROUTINE MAINTENANCE SCHEDULE
dust container
empty the dust container
EN
clean thoroughly by removing dirt
self-cleaning base
residues
clean each filter thoroughly by
primary filter
HEPA filter
removing dirt residues,
sponge filter
should not be washed
clean thoroughly by removing hair,
side brushes
threads and residues using the
left (L) - right (R)
comb supplied
clean thoroughly by removing hair,
main brush
threads and residues using the
comb supplied
clean the sensors on the front of
the charging dock using a damp
cloth
charging dock
clean the contacts of the charging
dock using a damp cloth
clean all sensors on ROBÒ using a
sensors
damp cloth
clean thoroughly by removing hair,
casters
threads and dirt residues
tank with water
fill with water only
dispenser
MOP floor cloth
wash under running water
People who are sensitive to contact with dust should always wear personal protective
equipment (suitable face mask and gloves) before cleaning the filters, brushes and dust
container.
11
without self-cleaning
with self-cleaning base
empties automatically
when the robot returns to
after every use
the self-cleaning base
every 10 cleaning cycles
weekly visual inspection
weekly visual inspection
filters
and clean when necessary
and clean when necessary
weekly visual inspection
weekly visual inspection
and clean when necessary
and clean when necessary
weekly visual inspection
weekly visual inspection
and clean when necessary
and clean when necessary
every 30 cleaning cycles
every 30 cleaning cycles
every 20 cleaning cycles
every 20 cleaning cycles
every 20 cleaning cycles
every 20 cleaning cycles
every 10 cleaning cycles
every 10 cleaning cycles
empty after every use
after every washing cycle
CLEANING THE DUST CONTAINER - (SELF-CLEANING FUNCTION)
WITH AUTOMATIC CHARGING BASE
The dust container is cleaned automatically when ROBÒ returns to the self-cleaning charging base.
base
--
PERIODIC INSPECTION OF THE DUST CONTAINER
We recommend periodically checking the dust container manually and clearing it thoroughly from any
materials not sucked up by the central vacuum unit.
2 - Open the dust container, empty it completely
and clean it with a cloth.
automatic suction
self-cleaning base
dust sucked up by the central vacuum unit
1 - Press the opening/closing lever (A) to
remove the dust container from ROBÒ.
3 - Press the lever (A) again and insert the
container until you hear a CLICK.
ROBÒ TR800 Instruction Manual
EN
A
Publicité
