Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
DOMESTIC ENVIRONMENTAL CONDITIONS
For optimal results, the temperature of the
domestic environment must be between 10°C and
40°C.
INSTALLING THE CHARGING DOCK WITHOUT THE SELF-CLEANING BASE
Position the charging dock at least 100 cm
away from stairs, empty zones and walls,
so that ROBÒ can leave the charging dock
EN
freely.
Make sure that the floor is flat and that the
rear part of the self-cleaning base on which
the robot is inserted touches the wall.
Make the electrical connection to power the
charging dock as shown in the picture.
e d
n d
m e
o m
c e
r e c
t a n
d i s
c m
1 0 0
ACTIVATING / DEACTIVATING THE AUTOMATIC SELF-CLEANING FUNCTION
The self-cleaning function can only be performed with the self-cleaning base.
To disable this setting, move ROBÒ off the self-cleaning charging base and
simultaneously press and hold for 3 seconds the
collision guard, or disable it via the TUBO' ROBÒ app.
6
PLEASE NOTE
Prevent direct sunlight from reaching the charging
dock as it may interfere with the communication
and hamper the regular operation of ROBÒ.
CONNECTING THE CHARGING
DOCK TO THE POWER SUPPLY
e d
n d
m e
o m
c e
r e c
t a n
d i s
c m
1 0 0
button and the front
INSTALLING THE CHARGING DOCK WITH THE SELF-CLEANING BASE
In this solution, the self-cleaning base is connected to a central vacuum unit to eliminate the
dust collected by ROBÒ without the user's direct intervention.
CONNECTION DIAGRAM
vacuum socket
self-cleaning base interface with the vacuum socket
dust vacuum line
connected to the
central vacuum unit
self-cleaning base
e d
n d
m e
o m
c e
r e c
t a n
d i s
c m
1 0 0
ROBÒ TR800 Instruction Manual
protective cover
charging dock
ROBÒ
floor
Connect the self-cleaning charging base to the
central vacuum unit.
(Instructions for installing the self-cleaning charging
base to a central vacuum unit)
e d
n d
m e
o m
c e
r e c
t a n
d i s
c m
1 0 0
EN
Publicité
