Declaration Of Incorporation - RK Rose+Krieger EP-II Notice D'assemblage

1. Declaration of incorporation

1.1 Declaration of incorporation
As set out in Machinery Directive 2006/42/EC, Annex II, 1.B for partly completed machinery
Manufacturer
RK Rose+Krieger GmbH
Potsdamer Straße 9
D-32423 Minden, Germany
Description and identification of the partly completed machine.
Product/manufacture:
Type:
Serial number:
Project number:
Order:
Function:
The following basic requirements of Machinery Directive 2006/42/EC are applied and fulfilled:
1.3., 1.3.2, 1.3.7, 1.3.9, 1.5.8, 1.1.5, 1.6.1, 4.1.2.3, 4.1.2.6, 4.1.3, 4.4.2
Moreover, we declare that the special technical documents have been created according to
Appendix VII Part B.
The manufacturer declares explicitly that the partially completed machinery meets all the relevant
provisions of the following EC directives:
2006/42/EC
2011/65/EC
26
The person in the community that is authorised to compile the
relevant technical documents.
Michael Amon
RK Rose+Krieger GmbH
Potsdamer Straße 9
D-32423 Minden, Germany
see type plate label on the front page of these assembly instructions
see type plate label on the front page of these assembly instructions
see type plate label on the front page of these assembly instructions
see type plate label on the front page of these assembly instructions
see type plate label on the front page of these assembly instructions
A rotational movement is transformed into a linear positioning movement
of the guide carriage by means of a spindle. The guide tubes and spindle
can be covered with bellows. The linear unit is driven using the handwheel
or a motor.
Directive 2006/42/EC of the European Parliament and of the Council of
17 May 2006 on machinery and amending Directive 95/16/EC (recast)
Directive 2011/65/EC of the European Parliament and of the Council from
June 8th, 2011 on the restriction of the use of certain hazardous
substances in electrical and electronic equipment