Adjusting The System Parameters; Using The System Parameters - Yamaha YSP-600 Mode D'emploi

Adjusting the system parameters

This unit has additional menus that are displayed in the front panel display. These menus offer additional operations to
adjust and customize the way this unit operates.
Note
When "F.PANEL KEY" is set to "F.PANEL: OFF" (see page 75), STANDBY/ON on the front panel is ineffective. Use STANDBY/ON
on the remote control instead to adjust the system parameters.

Using the system parameters

Follow the procedure below to enter the system
parameters.
INPUT VOLUME STANDBY/ON
STANDBY/ON POWER POWER
AV TV
STB VCR DVD AUX
TV
INPUT1 INPUT2 MACRO
TV
1
Press STANDBY/ON on the remote control to
turn off the power of this unit.
STANDBY/ON
74
En
Adjusting the system parameters
CH LEVEL MENU
TV/AV
ENTER
YSP
TEST RETURN
2
Press and hold INPUT on the front panel and
press STANDBY/ON on the remote control to
turn on the power of this unit.
"MEMORY PROTECT" is displayed in the front
panel display.
INPUT
3
Release INPUT on the front panel.
INPUT
4
Set the operation mode selector to YSP.
TV/AV
YSP
5
Use / to select the parameter to be set,
then press ENTER.
See the table on page 75 for the types of parameters.
ENTER
6
Use / to select and change the parameter
setting.
See the table on page 75 for the parameter settings.
ENTER
STANDBY/ON
ENTER
ENTER