Accessing And Using The Osd Menus (Kvm Switch) - Avocent LCD17SWT8 Guide D'installation

6 Integrated LCD KVM Switch Installer/User Guide

Accessing and using the OSD menus (KVM switch)

OSD menus allow you to access and edit server name, setup functions,
autoscan capabilities and firmware upgrades.
Table 1.4: Navigating the OSD Menu (KVM Switch)
To do this:
Activate KVM switch OSD
Deactivate KVM switch OSD ESC (Escape key)
Change Value
Select Item
NOTE: The two consecutive ScrLk keystrokes should be pressed within two
seconds and the following command key(s) should also be pressed within two
seconds. Otherwise, the hotkey sequence will not be validated.
Figure 1.4: Main OSD Window (8-port Integrated LCD KVM Switch Shown)
The following options will be selectable via the Main OSD window.
Table 1.5: Main OSD Menu Functions
Function
Select server
Edit server name
Use this hotkey sequence:
ScrLk + ScrLk + Spacebar
Left/right arrow keys
Up/down arrow keys
Description
Use up/down arrow key to navigate and
press PgUp/PgDn to scroll page. Press
Enter to select.
Pressing Insert allows you to change a
server name. Enter confirms the change.