Connection And Initial Operation - Lenz Digital plus SET100 Mode D'emploi

13
E
4

Connection and initial operation

All the LZV100 connections are designed as pluggable terminal
screws.
4.1 Connecting the LZV100 to the tracks
Connect terminals J and K of the LZV100 to
the siding track of your model railway:
Connection: 2-wire tracks
Connection: track with
neutral wire
The LZV100 track connection
No radio interference suppression capacitors may be installed in the
track system. These capacitors are necessary only for the
interference suppression in conventional operation. If used with the
Digital plus system, however, they would only distort the data format
and interfere with the fault-free transmission of data.