[En] Brief Instruction Manual Rapidcount X 400 - ratiotec rapidcount X 400 Mode D'emploi

Brief Instruction manual rapidcount X 400
Dear Customer,
Thank you for deciding on the rapidcount X 400 banknote counter from ratiotec. You have made a good choice with
the purchase of this quality product. With this device you will be able to count large amounts of banknotes both
quickly and easily.
Please read the operating instructions through carefully to ensure smooth and fault-free operation. We additionally
recommend an annual maintenance of the machine once a year via the ratiotec service. The ideal counting capacity
is limited to 1 million banknotes per year.
Front of the device
1. Feeder rails
2. Display
3. Function Control Panel
4. Banknote ejector
5. Banknote feeder
6. Holding Groove
7. ON | OFF switch
8. USB port
Rear of the device
1.
Adjusting screw for banknote
feeder
2. Opening Cover
3. Power Socket
4. Printer Port for receipt printer
(compatible with RTP300
printer)*
5. USB port
6. RJ11 External Display Port
* Note:
a standard printer cable (RTP300 printer) is compatible with the X 400
1.
5.
3.
2.
8.
4.
1.
3.
Note on feeder rails:
Please ensure that the banknote
feeder rails have been inserted before
starting to operate the device. These are
6. packed separately in polystyrene in the
rapidcount X 400 packaging. Remove
the banknote feeder rails carefully from
7.
the polystyrene and insert them into the
slot provided.
Stuck or jammed banknotes
can be removed from the ac-
cessible interior thanks to the
2.
opening cover. The machine is
easy to clean.
5. 6.
4.
[ EN]
3