Klarstein ENERGIEWENDE Mode D'emploi page 63

Adjustment range of the speed stages of the convection motor at different fire
power stages:
Fire power level
Fire power level 1
Fire power level 2-3
Fire power level 4-5
Input of parameters for each power level
Note: These settings have been configured at the factory and may only be
adjusted by qualified personnel!
Example: [1A:050:1B:020:1C:019] means that in the first power stage the
screw motor stops for 5.0 seconds, works for 2.0 seconds, the speed of the
outlet motor is 19.
Range of the speed stages of the motor
All speed levels (1-5) are available, any speed is possible.
Only speed levels 3, 4 and 5 are available.
Only speed levels 4 and 5 are available.
Exhaust engine speed
Stop time of the screw
motor
Operating time of the
screw motor
power level
EN
63