Klarstein ENERGIEWENDE Mode D'emploi page 46

EN
46
Notes on the Burner
It is very important to keep an eye on the heating and burner situation during
the entire firing process. Failure to do so will void the warranty and can be
dangerous.
Do not overload the ash container with pellets, as shown in the following
figure. If this is the case, allow the unit to cool down and remove the ash
residue from the plates (see chapter „Cleaning and Care").
With correct combustion, as shown in the picture below, the ash container
is practically empty. The flame (rich in oxygen) sparkles white and does not
discolour the glass.