Benchmark BW4400 Mode D'emploi page 35

Maximum capacity (1.1L)
SAE10W-30 oil is recommended for general use.
DO NOT OVERFILL.
Effective Viscosity Range of Engine Oils
5W-30
5W-30
-30 -20
-30 -20
-20 0
-20 0
Note
Do not tilt the pressure washer when adding engine oil. This could result
in overfilling and damage to the engine.
Use high quality engine oil with strong detergents. Using non-detergent
or 2-stroke oil could shorten the engine's working life.
Handle and store engine oil with care, avoid getting dirt or dust into the
oil.
Do not mix different engine oils.
Before the engine oil falls below a safe level, the low oil alert system will
automatically shut off the engine. The low oil light will turn on.
To avoid the inconvenience of unexpected engine shutoff, check the
engine oil level as often as possible.
Use 4-stroke engine oil, certified to meet or exceed API standard SG, SF,
SAE ratings.
Effective Viscosity Range of Engine Oils
Synthetic 5W-30
Synthetic 5W-30
10W-30
10W-30
0°C
-10 10
0°C
-10 10
32°F
20 40
32°F
20 40
Maximum Oil Level
Minimum Oil Level
Maximum Oil Level
Minimum Oil Level
28
15W-50
15W-50
20 30
20 30 40
60 80 100
60 80 100
8. 6. 2) Ta k e off the s pa rk a rres ter
a fter the eng ine cool d own.
8. 6. 2) Ta k e off the s pa rk a rres ter
8. 6. 2) Ta k e off the s pa rk a rres ter from the
a fter the eng ine cool d own.
a fter the eng ine cool down.
8. 6. 2) Ta k e off the s pa rk a rres ter from the
a fter the eng ine cool down.
40 50 °C
50 °C
120 °F
120 °F
8. 6
8. 6. 2) Ta
8. 6. 2) Ta
a ft
BW SERIES
8. 6
a ft