Stopping The Engine - Benchmark BW4400 Mode D'emploi

4.2 STOPPING THE ENGINE

Normal Operation
1
4
1. Engage the safety on the spray wand trigger.
2. Turn the engine power switch to the OFF position.
3. Turn the fuel lever to the CLOSED position.
4. Turn off the water supply. Unlock the safety of the spray trigger and
depressurize the system by squeezing the trigger until the water stops
flowing. Then flip the safety lock back to the locked position.
5. Unplug all hoses.
Emergency Stop (All Models)
1. To stop the engine in an emergency, turn the power switch OFF immediately.
Note
Make sure the fuel valve and engine switch are in the OFF position when
stopping, transporting, and storing the pressure washer.
2
5
18
3
BW SERIES