Waste Disposal; Bartscher Gmbh Franz-Kleine-Str; D-33154 Salzkotten Germany - Bartscher A120.408 Mode D'emploi

Problem
Temperature control is set, the
red power control lamp flashes
up, but the heating plate is not
heating up.
The above described problem cases are given for orientation and as examples.
Should these or similar problems occur, please turn off the machine immediately
and don´t use it anymore. In order to check and repair your machine, please
contact a qualified expert or the manufacturer immediately.

8. Waste disposal

Discarding old devices
At the end of its service life the discarded device has to be disposed in accordance with
the national regulations. It is advisable to contact a company which is specialized in
waste disposal, or just contact the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit for
use before disposal. For that purpose disconnect device from mains supply and
remove mains connection cable from the device.
NOTE!
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
- 26 -
• Heating element is
defective.
For the disposal of the device please consider
and act according to the national and local rules
and regulations.
Cause
phone: +49 (0) 5258 971-0
fax: +49 (0) 5258 971-120
Solution
• Contact retailer.