GE GTS18 Serie Manuel Du Propriétaire Et Instructions D'installation page 12

Installation Instructions
REVERSING THE DOOR SWING (CONT.)
RE-HANGING THE DOORS
1. Lower the fresh food
door onto the bottom
hinge pin. Be sure the
washer is in place on
the pin.
2. Tilt the door towards the
cabinet. As the door is
brought into position,
align the socket in the
door with the hole in the
center hinge. Place the
center hinge pin into the hole in the center hinge
and tighten. Make sure the washer is on the top of
the hinge pin.
Hinge
Pin with
Washer
Center
Hinge
12
Plastic
Washer
Hinge
Pin
RE-HANGING THE DOORS (Cont.)
3.
onto the center hinge
pin. Be sure the washer
is in place on the pin.
4. Tilt the door towards
top hinge fitting the pin
into the socket on the
top of the door.
5. Make sure the door is slightly above the top of the
cabinet and the gap between the doors is even
not over-tighten these screws. Tighten them until
they are just snug, and then turn them another
one-half turn.
6. Replace the top hinge cover.
Top Hinge
Cover
Top
Hinge
Center
Gap
Hinge
Plastic
Washer
Hinge
Pin
49-60780-1