GE GTS18 Serie Manuel Du Propriétaire Et Instructions D'installation page 11

Installation Instructions
REVERSING THE DOOR SWING (CONT.)
REMOVING THE DOORS (Cont.)
8. Remove the bottom hinge bolts and relocate the
bottom hinge to the opposite side of the cabinet.
Tighten bolts.
Hinge Pin
REVERSING THE DOOR HANDLES
Stainless Steel Handle
1. Remove handle screws from the top and bottom of
fresh food door.
2.
wrench.
3. Remove door handle.
4. Change places between the handle fastener and
plug button on door front.
5. Move the plug buttons on top and front of the door
to fill the now vacant holes.
6.
the screws from the door stop on one side with a
other side of the door.
7. Attach handle to fresh food door with screws at
screw at bottom of handle.
8.
to tighten set screw at top of handle.
9.
49-60780-1
9.
and tighten.
Bottom Hinge
Bottom Hinge
REVERSING THE DOOR HANDLES
Plastic Handle Assembly
1. Remove handle screws from the top of fresh food
door. Remove handle screws from the bottom of
2. Remove door handle on fresh food door by sliding
the handle up off of the fastener. Remove door
off of the fastener.
3. Change places between the handle fastener and
plug button on door front.
4. Move the plug buttons on top and front of the door
to fill the now vacant holes.
5.
the screws from the door stop on one side with a
other side of the door.
6. Attach handle to fresh food door by sliding handle
down onto fastener and with screws at top of
handle.
7.
onto fastener and with screws at bottom of handle.
8.
Hinge Pin
11