Rockwell Automation Allen-Bradley MicroLogix 1000 Instructions D'installation page 4

Installation Instructions
MicroLogix 1000 Programmable
Controllers
For More Information
Related Publications
For
A description on how to use your MicroLogix
1000 programmable controllers. This manual
also contains status file data and instruction set
information.
A procedural manual for technical personnel who
use the Allen-Bradley Hand-Held Programmer
(HHP) to monitor and develop control logic
programs for the MicroLogix 1000 controller.
More information on proper wiring and grounding
techniques.
The procedures necessary to install and connect
the AIC+ and DNI.
A more detailed description on how to install and
use your AIC+ Advanced Interface Converter.
A more detailed description on how to install and
use your DeviceNet Interface.
If you would like a manual, you can:
download a free electronic version from the internet:
www.theautomationbookstore.com
purchase a printed manual by:
–
contacting your local distributor or Rockwell Automation representative
–
visiting
www.theautomationbookstore.com
–
calling (USA/Canada) or
1.800.963.9548
(Outside USA/Canada)
2
Refer to this Document Pub. No.
MicroLogix 1000
Programmable Controllers 1761-6.3
User Manual
MicroLogix 1000 with
Hand-Held Programmer 1761-6.2
(HHP) User Manual
Industrial Automation Wiring
1770-4.1
and Grounding Guidelines
Advanced Interface
Converter (AIC+) and
1761-5.11
DeviceNet Interface (DNI)
Installation Instructions
AIC+ Advanced Interface
1761-6.4
Converter User Manual
DeviceNet Interface User
1761-6.5
Manual
or
www.ab.com/micrologix
and placing your order
001.330.725.1574