Bosch PAS0720 Mode D'emploi page 41

Programming the timer
The appliance needs to be turned on with the
clock set in order to programme start / stop
times.
Press the key to navigate through the
timer menu. Press the "+" key to programme
the different options available on your
appliance.
• "Off" : appliance not programmed.
• "Start" : programming the appliance
start time.
• "Start/ Stop"
appliance start and stop time.
• "Stop" : programming the appliance .
Programming the appliance start time
Press the key to position the cursor on
the timer menu. The last option programmed
appears by default.
Use the and
option (see "+" and "–" keys).
Use the key (see "Up" and "down" keys)
to lower the cursor to the start time menu.
Then use the
programmed time until the desired time is
reached.
Instructions for Use
: programming the
keys to select the
and keys to modify the
The time can be modified in steps of 15
minutes.
Press the
without touching any keys to memorise the
start time set.
The set time is displayed on the screen
together with the relevant symbol
the functions set.
10 sec/
Programming the appliance start / stop
time
Press the
the timer menu. The last option programmed
appears by default.
41
key or wait for 10 seconds
key to position the cursor on
and