General Safety Rules - Aerotec Mobilpack 2 Manuel D'utilisation

DESCRIPTION
1.
OUTLET PRESSURE REGULATOR KNOB
2.
SAFETY VALVE
3.
AIR TANK PRESSURE GAUGE
4.
TOOL OUTLET PRESSURE GAUGE
5.
FEMALE QUICK CONNECT
6.
AUTO ON/OFF SWITCH
7.
24V LITHIUM-ION BATTERY (sold separately)
8.
AIR TANK
9.
AIR TANK DRAIN VALVE
10.
CHARGER(sold separately)
Read and understand tool labels and manual. Failure to
follow could result in death or serious injury.
Save these instructions.
1. WORK AREA SAFETY
a. Keep your work area clean and well lit. Cluttered
areas and benches invite accidents. Floor must not
be slippery from wax or dust.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or fumes.
c. Keep bystanders, children, and visitors away
while operating tools.
d. Power tools create sparks which may ignite the
dust or fumes. Keep bystanders, children, and
visitors away while operating tools. Distractions
can cause you to lose control.
e. Operate air compressor in an open area at least 457
mm away from any wall or object that could
restrict the flow of fresh air to ventilation
openings.
2. ELECTRICAL SAFETY
a. Avoid body contact with grounded surfaces
such as pipes, radiators, ranges, and refrigerators.
There is an increased risk of electric shock if your body
is grounded.
b. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.

GENERAL SAFETY RULES

WARNING
English English
English
c. Do not abuse cord. Never use the cord to carry
the tool or pull the plug from an outlet. Keep cord
away from heat, oil, sharp edges, or moving parts.
Replace damaged cords immediately. Damaged
cords increase the risk of electric shock.
d. When operating a power tool outside, use an
outdoor extension cord marked "W-A" or "W".
These cords are rated for outdoor use and reduce
the risk of electric shock.
3. PERSONAL SAFETY
a. Use safety equipment. Always wear eye
protection. Dust mask, nonskid safety shoes,
hard hat, or hearing protection must be used for
appropriate conditions.
b. Always wear eye protection with side shields,
along with hearing protection. Failure to do so
could result in objects being thrown into your eyes
and other possible serious injuries.
c. The employer and/or user must ensure that
proper eye protection is worn.
d. We recommend a wide vision safety mask
for use over eyeglasses or standard safety
glasses that provide protection against flying
particles both from the front and side.
e. Ensure compatibility of accessories before using.
f. Read and understand the operating manual for
any accessories or air tools before using.
g. Additional safety protection will be required in
some environments. For example, the working
area may include exposure to a noise level which
can lead to hearing damage. The employer and
user must ensure that any necessary hearing
protection is provided and used by the operator
and others in the work area. Some environments
will require the use of head protection equipment.
h. Stay alert, watch what you are doing, and use
common sense when operating a tool. Do not
use tool while tired or under the influence of drugs,
alcohol or medication. A moment of inattention
while operating power tools may result in serious
personal injury.
i. Dress properly. Do not wear loose clothing
or jewellery. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Loose clothes, jewellery, or long hair can be caught
in moving parts.
j. Do not overreach. Keep proper footing and