Publicité
Les langues disponibles
Les langues disponibles
Repair and customer service.
Before mounting or replacing application tools or accessories, remove the bat-
WARNING
tery. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Exchangeable parts
If required, you can change the following
parts yourself:
application tools, guide roller, battery
Lubricating the thread of the height
adjustment (figure 18).
Clean and lubricate the thread of the height
adjustment on the guide plate as required.
Unscrew the guide plate and turn out the
guide-plate holder. Clean the thread on both
sides and apply oil.
Service.
Have maintenance carried out
WARNING
only through qualified person-
nel. Incorrectly mounted leads and compo-
nents can cause serious injuries. Have the
required service carried out only through a
FEIN customer service agent.
Fig. 18
1.
7.
6.
2.
5.
3.
Products that have come into contact with
asbestos may not be sent in for repair. Dis-
pose of products contaminated with asbestos
according to the applicable country-specific
regulations for such disposal.
The current spare parts list for this power
tool can be found in the Internet at
www.fein.com.
en
TX 20
2.7 - 2.9 Nm
4.
33
Publicité
