Hapro LUXURA X10 Mode D'emploi page 21

Facialcooler settings menu
1 Facialcooler start 2
2 Value 1 40
3 Value 2 50
4 Value 3 60
5
6
Coin:
5
6
8. Facialcooler
9. Audio
10. Main cooling
11. Coin
Coin settings menu
1 Relais puls 1
2 Direct on OFF
5
6
Facialcooler at start:
Select Facialcooler start
Scroll to change the setting. ( 0 - 8 )
Press 'Start', the setting will be saved and the 'main settings' menu will appear.
Press 'Stop', the setting will not be saved and the 'main settings' menu will appear.
Go to the configuration menu (from left to right)
Use the scroll button to select the Coin option.
Press 'Start' to enter the Coin sub-menu.
Relay pulse:
This is the delay time between starting and ending the tanning session.
Select Relais puls
Scroll to change the setting. ( 0 - 20 )
Press 'Start', the setting will be saved and the 'main settings' menu will appear.
Press 'Stop', the setting will not be saved and the 'main settings' menu will appear.
- 21 -