Hapro LUXURA X10 Mode D'emploi page 16

Qsens settings menu
3 Delay 1 3
4 Timer 1 10
100
5 Timer 2
11
6 Spray time nozle1
5
6
Qsens settings menu
10
4 Timer 1
100
5 Timer 2
11
6 Spray time nozle1
4
7 Spray time nozle2
5
6
Qsens settings menu
5 Timer 2 100
6 Spray time nozle1 11
7 Spray time nozle2 4
8 Timer 3 20
5
6
Spray time for nozzle at the foot:
Setting for the nozzle spray time at the foot.
Select Spray time nozle 1. ( 6 )
Scroll to change the setting. ( 0 - 20 Sec. )
Press 'Start', the setting will be saved and the 'main settings' menu will appear.
Press 'Stop', the setting will not be saved and the 'main settings' menu will appear.
Spray time for nozzle at the top:
Setting for the nozzle spray time at the top.
Select Spray time nozle 2. ( 7 )
Scroll to change the setting. ( 0 - 20 Sec. )
Press 'Start', the setting will be saved and the 'main settings' menu will appear.
Press 'Stop', the setting will not be saved and the 'main settings' menu will appear.
Timer 3 :
Setting for compressor running time.
Select Timer 3. ( 8 )
Scroll to change the setting. ( 0 - 200 mSec. )
Press 'Start', the setting will be saved and the 'main settings' menu will appear.
Press 'Stop', the setting will not be saved and the 'main settings' menu will appear.
- 16 -