Hapro LUXURA X10 Mode D'emploi page 17

Qsens settings menu
6 Spray time nozle1 11
7 Spray time nozle2 4
8 Timer 3 20
9 Interval time 2
5
6
Qsens settings menu
4
7 Spray time nozle2
8 Timer 3 20
9 Interval tijd 2
10 Blinktime LED 5
5
6
Qsens settings menu
9 Interval tijd 2
10 Blinktime LED 5
11 Delay 2 0
12 Facialcooler delay 0
5
6
Interval time :
Interval time between spray sessions.
Select Interval time. ( 9 )
Scroll to change the setting. ( 0 - 5 Min.)
Press 'Start', the setting will be saved and the 'main settings' menu will appear.
Press 'Stop', the setting will not be saved and the 'main settings' menu will appear.
Blinktime LED:
Select Blinktime LED. ( 10 )
Scroll to change the setting. ( 0 - 100 mSec.)
Press 'Start', the setting will be saved and the 'main settings' menu will appear.
Press 'Stop', the setting will not be saved and the 'main settings' menu will appear.
Facial cooler delay:
Setting for the delay time between the main valve and the main ventilators.
Select Facialcooler delay. ( 12 )
Scroll to change the setting. ( 0 - 255 MSec.)
Press 'Start', the setting will be saved and the 'main settings' menu will appear.
Press 'Stop', the setting will not be saved and the 'main settings' menu will appear.
- 17 -