Gaspardo MTE-R Emploi Et Entretien page 56

ENGLISH
- Telescoping tubes must always overlap by at least 1/2 of their
length in normal operation and at least 1/3 of their length in
all working conditions. When it is inserted all the way, the
minimum admissible play is 4 cm.
- When using the equipment on another tractor, check that
conditions are as stated above and check that the guards
complete ly cover the rotating parts of the Cardan shaft.
The spare parts must correspond to the manufacturer's spe-
ATTENTION
Assemble, operate and disconnect the cardan shaft always
according to information and safety standards supplied for
shaft use, contained in the manual provided by the shaft
manufacturer and delivered with the shaft itself.
Each cardan shaft is equipped with a use and maintenance
manual. Always carefully follow information and safety stan-
dards supplied for shaft use as contained in the manual.
Any damage to the machine and/or persons or property aris-
ing from failure to adhere to the above and incorrect use of
the PTO shaft are not attributable to MASCHIO GASPARDO
S.p.A. and not recognisable under warranty.
CAUTION
USE AND MAINTENANCE
4.3 STABILITY OF PLANTING UNIT AND
TRACTOR DURING TRANSPORT
I
F
T E
T F
T R
I R
I F
a
b
c
d
(*) See instruction handbook of the tractor.
F
R
T
F
a
[I T
R F
=
T
E
T
R
b
T
E
560
mm
I
R
c d
cod. G19504610