Software Update; Auto Update; Usb Update - Samsung HW-Q70T Manuel Complet

Place the Soundbar on a TV stand.
As illustrated in the image, align the center of the
Soundbar with the center of the TV, carefully
place the Soundbar onto the TV stand.
NOTES
• Make sure the Soundbar is placed on a flat
and solid surface.
• Insufficient gap from the TV may cause
acoustic problem.
12 SOFTWARE
UPDATE

Auto Update

When the Soundbar is connected to the Internet,
software updates automatically occur even when
the Soundbar is turned off.
• To use the Auto Update function, the
Soundbar must be connected to the Internet.
The Wi-Fi connection to the Soundbar will be
terminated if the Soundbar's power cord is
disconnected or the power is cut off. If the
power is cut off, when the power comes back
on or you reconnect the power cord, turn on
the Soundbar, and then reconnect it to the
Internet.

USB Update

Micro USB to
USB adapter Cable
(not supplied)
Samsung may offer updates for the Soundbar's
system firmware in the future.
When an update is available, you can update the
Soundbar by connecting the USB drive that
contains the update firmware to the SERVICE
port of the Soundbar.
ENG - 37
Bottom of the Soundbar
NETWORK ID SET
DIGITAL AUDIO IN
(OPTICAL)
HDMI
SERVICE
HDMI TO TV
DC 19V (eARC/ARC)
SERVICE