Bosch GLM 100 C Consignes D'utilisation/De Sécurité page 15

3. Remember to unplug charger during storage period.
4. If battery does not charge properly:
a. Check for voltage at outlet by plugging in some other electrical device.
b. Check to see if outlet is connected to a light switch which turns power
"off" when lights are turned off.
c. Check battery terminals for dirt. Clean with cotton swab and alcohol if
necessary.
d. If you still do not get proper charging, take or send tool, and charger
to your local Bosch Service Center. See "Tools, Electric" in the Yellow
Pages for names and addresses.
Note: Use of chargers not sold by Bosch will void the warranty.
Product Description and Specifications
The measuring tool is intended for measuring distances, lengths, heights,
clearances, angles and for the calculation of areas and volumes. The
measuring tool is suitable for measuring indoors and outdoors.
The measuring results can be transmitted to other devices via Bluetooth ®
and USB data port.
Digital Laser Measure GLM 100 C
Distance measurement
Measuring range (typical)
Measuring range
(typical under unfavorable conditions)
Measuring range (max.)
Measuring accuracy (typically)
Intended Use
-15-
2" – 265- ft (80 m)
A)
2" – 145-ft (45 m)
B)
2" – 330-ft' (100 m)
C)
±1/16" (±1.5mm )
A)