Endress+Hauser eco-graph Mise En Service page 58

4. Setting up unit - SET UP
56
Method used with Set-up diskette:
1. Copy set-up to diskette:
- Place a formatted diskette into the unit diskette drive.
- Select "Diskette functions \ Save set up to diskette" from the main menu.
- Remove the diskette from the unit and place into the PC diskette drive.
2. Match the set-up in the PC programme and save to respective data bank:
- Select "Functions \ Paperless recorder \ Read parameter diskette and read the
respective set up file (*RPD) from the diskette drive (e.g. A:\).
- Match the unit settings to the desired parameters "Unit \ Display \ change unit
settings \ New".
- Select "Only save to data bank". The new set up parameters are saved to the PC
data bank.
- Transfer the new SETUP-File onto the disc in your PC. Select: "Functions \
paperless recorder \ create parameter disc" plus the suitable unit.
- Remove the diskette from the PC diskette drive and replace it into the unit diskette
drive.
3. Read the set up into one (or more) unit(s):
- Select "Diskette functions \ Load set up from diskette" from the main menu.
Method used with serial interface:
1. Connect the unit to the PC using the serial interface (optional "Digital I/O"),
e.g. RS 232.
2. Start the PC programme and select "Unit \ Display \ change unit settings \ New unit.
3. Match the unit settings to the required parameters and select "Save in data bank
and transmit to unit". The new set up parameters are automatically saved to the PC
data bank and transmitted to the unit.