Assembly - Bosch UniversalAquatak 1900 Consignes De Sécurité/D'utilisation

Disconnect the plug from the power source before making any assem-
bly, adjustments, or changing accessories. Such preventive safety mea-
sures reduce the risk of starting the pressure washer accidentally.
Using Washer Handle
The handle 5 folds back against the back of
the pressure washer unit for compact storage.
To unfold the handle, simply move it out and
upwards until it securely clicks into the upright
position. To lower the handle squeeze the two
red tabs 5a inwards to release the lock and
push the handle backwards and down (Fig. 3).
Trigger Handle and
Lance Assembly
Attach the lance 9 to the trigger handle 6 by
aligning slots, sliding the bayonet connection
into the trigger handle barrel 8, and turning
90° clockwise to lock into place (Fig. 4).
To disconnect the lance from the trigger han-
dle, push the lance into the trigger handle bar-
rel and then turn the lance 90° counter clock-
wise to unlock and pull out the lance (Fig. 4).
Fig. 4
Attaching Nozzle
Attach the 3-in-1 nozzle 10 to the lance 9
by aligning the small nib on the nozzle with
the matching recess on the end of the lance
and then pushing the nozzle until it clicks in
place (Fig. 5).
9
F016L81610 1900.indd 9

Assembly

8
6
8
6
To disconnect the nozzle from the lance,
press the release button and pull the nozzle
out (Fig. 5).
Fig. 5
10
5
5a
9
9
Fig. 3
9
5/3/17 9:06 AM