Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DE GB NL FR
Never use the device without the safety unit!
Incorrect usage and installation, or usage of a tap that is not
meant for pressure installations, may cause damage to the
device and thereby void the warranty!
Connection to the electricity supply
(Illustration 3.)
The device must be filled with water (see above). Only then
may the device be connected to the electricity supply (insert
the plug in the wall socket). Connection of the device to the
power supply network must take place in accordance with
electric installation standards and as specified by local laws
and regulations. The device must be directly connected to the
power supply network (230V) via an electrical cable and plug.
Avoid danger from damaged power supply cables. In the
event of damage, the device must be replaced by the manu-
facturer or its customer service department, or by an equiva-
lently-qualified person.
Ensure that the addition of this device will not overload the
fuse protection in your mains.
Internal modifications to the product may cause problems
if this work is not carried out by authorized and qualified
technical staff. The warranty only applies if the product has
not been modified in any way, i.e. subject to it being in un-
changed condition.
In order to avoid creating an unsafe situation by inappropri-
ate resetting of the maximum temperature safety device, this
unit may not be powered via an external switching device (a
time switch for example) or connected to a circuit, which is
regularly switched on and off by the power supply company.
Important: Never connect the plug to the wall socket if the
device is not yet filled with water!
18
Publicité
Table des Matières
