Maintenance - Erie water treatment ProFlow PF-GAC1 Instructions D'installation & Emploi

RECOMMENDATION
Notwithstanding the reliability of the appliance, we strongly
recommend to have it serviced and maintained on a regular
basis by a competent and duly trained technician. He will be
able to determine the appropriate maintenance interval for
the appliance, depending on your specific application and the
local operating conditions. The advantages of performing
regular maintenance are:
•
regular check of the local operating conditions (water
quality, pressure, etc);
•
regular control and adjustment of the settings of the
appliance, to guarantee it operates at maximum
efficiency;
•
minimize the risk of unexpected break-down.
Contact your dealer or installer for more information, or visit
our website.
ROUTINE CHECKS
Regularly the user should perform a basic check to verify if the
appliance is functioning correctly, on the basis of the
following control points:
1. Check settings of electronic control panel.
2. Check water composition before/after appliance.
3. Check drain line from control valve; there shouldn't be
any water flow (unless appliance is in regeneration).
4. Check appliance and surrounding area; there shouldn't be
any water leakages.
BYPASSING THE APPLIANCE
Occasionally it may be necessary to put the appliance
hydraulically in bypass, i.e. to isolate it from the water
distribution system; f.e.:
•
in case of an urgent technical problem;
•
when it is not necessary to supply treated water to the
application.
WITH FACTORY BYPASS (optional) (only for PF-GAC1 &
PF-AG1)
Picture 10.a
SERVICE POSITION
 = inlet valve to appliance is OPEN
❖ = outlet valve from appliance is OPEN
Picture 10.b
BYPASS POSITION
 = inlet valve to appliance is CLOSED
❖ = outlet valve from appliance is CLOSED
Picture 10.c
MAINTENANCE POSITION
 = inlet valve to appliance is OPEN
❖ = outlet valve from appliance is CLOSED
EN - English

MAINTENANCE

This appliance is manufactured from premium quality
material and assembled in safe conditions to assure it is clean
and sanitary. If installed and serviced correctly, this appliance
will not infect or contaminate your water supply. However, as
in any 'device' plumbed-in in your water distribution system,
a proliferation of bacteria is possible, especially in case of
'stagnant water'. Therefore this appliance will automatically
rinse the filter media periodically.
If the power supply to the appliance is disconnected for a
longer period of time, we recommend, when the power
supply is re-established, to manually initiate a complete
regeneration.
Page 12
SANITIZING THE APPLIANCE