Brother P-touch PT-9600 Manuel D'emploi page 70

Ch. 4 Advanced Functions
Pin Signal INPUT/
No. Name OUTPUT
1
2 INPUT
RD
3 OUTPUT
TD
4 DTR OUTPUT
5 SG
6
7 RTS OUTPUT
8
9
To install the serial printer driver:
1 Connect the PT-9600 to the computer's
serial port using the enclosed serial inter-
face cable as described on page 59, and
then turn on the P-touch.
2 In the dialog box that appears, allowing you
to select whether the P-touch will be con-
nected with a USB cable or an RS-232C
cable, select "Serial cable", and then click
the OK button. A dialog box appears,
allowing you to select whether to install or
uninstall the printer driver.
3 Select "Install", and then click the Next but-
ton.
®
For Windows 98 and 98 SE users:
4
Skip to step 5.
®
For Windows Me, 2000 and XP users:
A dialog box appears, allowing you to add a
P-touch (PTCOM) port.
60
Explanation
Not connected
Receive Data
Receives data transmit-
ted from the computer
Send signal Xon/Xoff
when Busy is set to
Xon/Xoff
Only in the ESC/P inter-
face mode: Sends X-off
when the printer is busy,
X-on when not busy
Data Terminal Ready
Signal Ground
Not connected
Request To Send
Not connected
Not connected
If a P-touch (PTCOM) port is already
installed, click the Next button and con-
tinue with step 5 below.
If a P-touch (PTCOM) port is not already
installed, click the Add button. The Port
Name dialog box appears.
From the list of PTCOM ports, select the
port where the PT-9600 is connected
("PTCOM1:" if the PT-9600 is connected to
the COM1 port, or "PTCOM2:" if the
PT-9600 is connected to the COM2 port),
and then click the OK button. In the Driver
Setup dialog box, click the Next button.
5 A dialog box appears, allowing you to
select the PTCOM port where the PT-9600
is connected.
Select "PTCOM1:" if the PT-9600 is con-
nected to the COM1 port, or "PTCOM2:" if
the PT-9600 is connected to the COM2
port, and then click the Next button. (On
®
Windows Me, 2000 and XP, select the
port added in step 4.) A dialog box
appears, allowing you to check how the
installation will be carried out.