Télécharger Imprimer la page

Deltec MCE 400 Instructions D'emploi Et Accessoires Et Pieces Detaches page 7

Publicité

Les langues disponibles

Les langues disponibles

Use with ozone
Deltec skimmers are suitable for use with ozone and will automatically suck the gas
through the venturi hose. A maximum volume of 25 mg/h should be used on tank
volumes that are suitable for this skimmer. Do not use excessive ozone, as it is
dangerous and can cause severe headaches.
Maintenance
The
skimmer range should require very little adjustment and maintenance.
Due to the high levels of calcium in marine aquariums and large volumes of air
drawn in, it is common for deposits to accumulate. Regular introduction of a small
amount of RO water into the inlet tap whilst running may help to prevent any build
up of salt and debris in the venturi.
Malfunction
Pump produces
insufficient air
excessive air bubbles
in aquarium water,
often in new
installations
Dimensions (l/w/h)
Technical data
MCE 400
216x77x490mm
Fault finding
cause
tap, airline or venturi
blocked
airline kinked
ozonizer blocked
caused by additives in
certain sea salts and water
conditioners
air tap closed to far
Power
app.
consumption
9 Watt
remedy
clean
remove kink
clean
use different salt or feed heavily for
a period, empty skimmer cup
frequently, open air tap fully or
remove for a few days. This
condition may last for several
weeks.
open air tap
min. height for sump
Air flow app.
installation
350 l/h.
600mm
Aquarium size
100 - 500 litre

Publicité

loading