CHAFFOTEAUX ARIANEXT COMPACT 04 Notice Technique D'installation Et D'entretien page 90

System interface
134 mm
Technical data
Power supply
Electrical absorption
Operating temperature
Storage temperature
Bus wire length and cross-sectional area
NOTE:
TO AVOID INTERFERENCE PROBLEMS, USE A SHIELDED CABLE OR TWISTED PAIR CABLE.
Buffer memory
Conformity
LVD 2006/95/EC - EMC 2004/108/EC
Electromagnetic interference
Electromagnetic emissions
Conformity to standards
Temperature sensor
Resolution degree:
Outdoor sensor
Position the outdoor sensor on the north-facing wall of the building,
at least 2.5 m from the ground and away from direct sunlight.
Remove the cover and install the sensor using the rawl plug and screw
provided. Perform connection using a 2x0.5 mm2 wire.
Maximum connection length 50 m. Connect the wire to the terminal
by introducing it from the lower part after creating a suitable passage.
Place the sensor cover back in the correct position..
90
16 mm
A
BUS
max. < 0,5W
-10 ÷ 60°C
-20 ÷ 70°C
max. 50 m - min. 0.5 mm²
2 h
EN 60730-1
EN 60730-1
EN 60730-1
NTC 5 k 1%
0,1°C
B
C