Installation Instructions; Information About Gas Heated Griddle Plates Minima Series - Eurofrequence Minima Serie Instructions Pour L'installation, L'emploi Et L'entretien

2.
Installation and any transformation for using other types of gas, must be performed by qualified technicians according
to the law in force.
See technical data tables: 1.1
WARNINGS:
Should the unit be installed against a wall, the latter must be heat resistant to temperatures of 80°C and must be fireproof.
Before proceeding with the installation, remove the protective plastic film from the relevant parts, eliminating any adhesive
residues with an appropriate cleaning product suitable for stainless steel.
Install the unit in a horizontal position; its correct levelling will be achieved by rotating the adjustable feet.
If the unit is installed by itself, it is advisable to fasten it to make its stability safer.
2.1

INFORMATION ABOUT GAS HEATED GRIDDLE PLATES MINIMA SERIES

This manual applies to our Gas Heated Griddle Plates Minima Series, Type A1 Category II (Natural Gas and L.P.G.).
See table 1.1.
The label according to EN437
and EN203-1-2 regulations, is
located inside the unit and/or at
back.
Example for Italy label:
Category II 2H3+
Pe = Incoming Pressure
Pi = Nozzle Pressure
20,37,50
Mod.
REA 16238T4 ITALY
Made by
Cat.
Pn (mbar)
G 20
G 25.1
- 15 -

INSTALLATION INSTRUCTIONS

MK
SN°
Pin.N°
Hz
HU
Type
II
2HS3B/P
25,25,30/30
G 30
G 31
kW
GB