Yamaha CD-S3000 Mode D'emploi page 9

A B
E Remote control sensor
Receives signals from the remote control.
y
The remote control transmits a directional infrared beam.
Be sure to aim the remote control directly at the remote
control sensor on the front panel of this unit during operation.
30 30
C
D
Approximately 6 m (20 ft)
F Display
The brightness can be adjusted with the DIMMER key
on the remote control (page 12).
G
(playback) / (pause) indicator
Lights in the playback/pause mode.
H Disc type indicator
Indicates the type (SA-CD/CD/HYBRID) of the disc
in the disc tray.
I Time display mode indicator
Indicates the time display mode of the display. Change
the mode by pressing the DISPLAY key on the remote
control (page 13).
Elapsed time of the current track
J Playback mode indicator
Indicates the current playback mode.
PROG: Program playback (page 14)
SHUFFLE: Shuffle playback (page 13)
REP OFF: Repeat playback off (page 12)
REP S: Single repeat playback (page 12)
REP ALL: All repeat playback (page 12)
K Information display
See page 28 for more information on MP3/WMA
playback.
Remaining time of the
current track
Total remaining time of the
disc
9
En