Storage - Maruyama B23L Manuel Du Propriétaire/De L'utilisateur

232025-04 12.11.30 11:50 AM ページ 31
80-tooth Blade
Sharpen with a single-cut flat file and a round file.
1.4 – 1.7 Times Original
Blade Thickness
40°
80°
Blade Thickness

Storage

For long term storage of the Trimmer/Brushcutter:
1. Empty the fuel tank into a suitable fuel storage
container.
2. Pump the primer bulb on the carburetor until all
fuel is discharged through the clear fuel return
hose.
3. Run the engine to remove any fuel that may
remain in the carburetor.
4. Perform all regular maintenance procedures and
any needed repairs.
5. Remove the spark plug and squirt a very small
amount of oil into the cylinder.
232025-10.indd 30
5°
0.039" – 0.059"
(1 – 1.5 mm) Radius
— US-30 —
CAUTION
POTENTIAL HAZARD
• Oil may squirt out of the spark plug open-
ing when you pull the starter grip.
WHAT CAN HAPPEN
• Oil can cause eye injuries.
HOW TO AVOID THE HAZARD
• Protect your eyes and keep your face
away from the spark plug opening.
6. Pull the starter grip once.
7. Slowly pull the starter grip to bring the piston to
the top of the cylinder (TDC).
8. Reinstall the spark plug.
9. Store the Trimmer/Brushcutter in a dry place
away from excessive heat, sparks or open flame.
13/12/25 14:51