General Cleaning And Tightening; Blade Sharpening - Maruyama B23L Manuel Du Propriétaire/De L'utilisateur

232025-04 12.11.30 11:50 AM ページ 30

General Cleaning and Tightening

WARNING
POTENTIAL HAZARD
• When engine is running, cutting head is
rotating and other parts are moving.
WHAT CAN HAPPEN
• Contact with rotating cutting head or
other moving parts could cause serious
personal injur y or death.
HOW TO AVOID THE HAZARD
• Always tur n of f your Trimmer/
Brushcutter before you clean or per-
form any maintenance on it.
The Maruyama Trimmer/Brushcutter will provide max-
imum performance for many, many hours if it is main-
tained properly. Good maintenance includes regular
checking of all fasteners for correct tightness, and
cleaning the entire machine.

Blade Sharpening

IMPORTANT: Replace any blade that is worn,
wraped, cracked or otherwise damaged in any
way.
IMPORTANT: Sharpen every tooth evenly so
the blade rotates smoothly. If you sharpen a
blade with a grinder, do not overheat the blade,
and do not quench a hot blade in water to cool it.
Never leave a sharp radius or groove when
grinding or filing.
232025-10.indd 29
Four-tooth Blade
Sharpen with a single-cut flat file.
0.118" (3 mm)
Eight-tooth Blade
Sharpen with a single-cut flat file and a round file.
0.079" – 0.118" (2 – 3 mm)
0.275" – 0.315" (7 – 8 mm)
— US-29 —
0.394" (10 mm)
0.059" – 0.098"
(1.5 – 2.5 mm) Radius
13/12/25 14:51