Using Manual-Adjust Function - Yamaha YSP-4000 Mode D'emploi

Playing back sound clearly (My Beam)

Using manual-adjust function

You can adjust the beam angle manually while playing
back an input source. This function is also ideal if the
listening position is out of the operation guarantee range
of the auto-adjust function.
1
Set the operation mode selector to YSP.
TV/AV
YSP
2
Press MY BEAM.
"MY BEAM" is displayed in the front panel display.
3
Press / while "MY BEAM" is displayed to
adjust the beam angle.
Control range: L90° to R90°
• Press repeatedly to increase the horizontal angle
on the left side.
• Press repeatedly to increase the horizontal angle
on the right side.
64
En
MY BEAM
5
ENTER