Using The Advanced Setup - Yamaha CD-S300 Mode D'emploi

■ Handling compact discs
• Always handle with care so that the playing surface is
not scratched. Do not warp discs.
• To keep clean the playing surface, wipe with a clean,
dry cloth. Do not use any type of disc cleaner, spray, or
any other chemical-based liquid.
• Do not wipe with a circular motion; wipe straight
outward from the center.
This unit is equipped with the following two special
modes, which may be useful for special purposes at stores
or offices.
Note
The special mode functions are incompatible with iPod.
Play mode memory
Retains the current playback mode (REPEAT and
RANDOM) after turning off the power, saving the time of
setting the playback mode again each time you turn on the
power.
The RESUM indicator in the front panel display lights up
when enabled.
Ready mode
Pauses playback after each track, allowing you to start the
next track at any desired timing.
The RDY indicator in the front panel display lights up
when enabled.

USING THE ADVANCED SETUP

PLAYABLE DISC AND FILE FORMAT
• Use a soft-tipped pen when writing on the label side of
the disc.
• When a disc is not being used, remove it from this unit
and store in an appropriate case.
• Do not expose discs to direct sunlight, high
temperature or high humidity for a long time.
Note: Do not use any lens cleaners as they may be a
cause of malfunction.
POWER OFF
PURE DIRECT +
PLAY MEM OFF
(Play)
POWER OFF
(Open/Close) + POWER ON
9
En