Ottobock 1E90 Sprinter Instructions D'utilisation page 10

2 Application
2.1 Intended Use
The product is intended solely for lower limb prosthetic fittings.
The product is not suitable for use in everyday prostheses.
2.2 Area of Application
Maximum permissible body weight, see table:
Stiffness version
Max. body weight [kg]
Max. body weight [lbs]
2.3 Environmental Conditions
Allowable Environmental Conditions
Temperature range for use: -10 °C to +60 °C (14 °F to 140 °F)
Allowable relative humidity 0 % to 90 %, non-condensing
Unallowable environmental conditions
Mechanical vibrations or impacts
Perspiration, urine, fresh water, salt water, acids
Dust, sand, highly hygroscopic particles (e. g. talcum)
2.4 Service Life
A general service life for this prosthesis component as part of a sport pros­
thesis cannot be determined, since strain varies widely depending on the
sport and intensity.
3 Safety
3.1 Explanation of Warning Symbols
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE
3.2 General Safety Instructions
CAUTION
Exceeding the service life and reuse on another patient
Fall due to loss of functionality as well as damage to the product
► Ensure that the approved service life is not exceeded (see section
"Service Life").
► Only use the product for a single patient.
10 | Ottobock
SPR-1 SPR-2
59 70
130 155
SPR-3 SPR-4
86 102
190 225
SPR-5 SPR-6
118 125
260 275