Fisher & Paykel WA42T26GW1 Guide D'installation Et D'utilisation page 22

Wash cycles and options
US
20
CA
Customizing the wash cycles
You can program your Ecosmart™ to remember the wash options you prefer for each wash cycle.
For instance, you may want to set the REGULAR cycle to cold wash or set HEAVY DUTY to include
a soak.
To customize a cycle
Press the POWER button.
1
Press selected WASH CYCLE button. Hold
2
down for 4 seconds. You will hear two quick
beeps and the wash cycle light will flash.
Select your wash options (eg cold wash, soak).
3
Press the WASH CYCLE button again to store
4
your customized cycle.
When you are customizing a wash cycle, you
can shorten or lengthen the agitation time.
To shorten the agitation time, press ADVANCE
■ ■
to reduce the number of green lights.
To increase the agitation time keep pressing
■ ■
ADVANCE until all the green lights are on.
(On HEAVY DUTY you can only decrease the
wash time.)
Note: unlike the FAVORITE cycle, you cannot customize a wash cycle to start at the rinse or
spin stage.
Favorite cycle
FAVORITE cycle lets you design your own wash cycle. FAVORITE can be any wash cycle with any
of its wash options, and it can start from any point in the cycle.
To set your favorite cycle
Press the POWER button.
1
Press the FAVORITE cycle button. Hold down for
2
4 seconds until you hear two quick beeps and the
FAVORITE light flashes.
Select your favorite cycle (eg REGULAR or DELICATE).
3
Select the wash options (eg SOAK, TIME SAVER). Use
4
ADVANCE if you want part of a cycle (eg SPIN ONLY).
Press FAVORITE again to store your favorite cycle.
5
Note: your Ecosmart™ will remember your FAVORITE cycle, or any other cycle that has been
customized, even when unplugged from the wall. It is not possible to program a delayed start
into the FAVORITE cycle.
Fig.26 Customizing a wash cycle
Fig.27 Customizing the wash progress
Fig.28 The FAVORITE cycle