Fisher & Paykel WA42T26GW1 Guide D'installation Et D'utilisation page 19

Wash options
When you press POWER to turn on your Ecosmart™,
it will automatically select a:
REGULAR wash cycle
■ ■
WARM wash temperature
■ ■
AUTO water level
■ ■
FAST spin speed
■ ■
Each of these wash options can be altered to suit
your wash needs. The following pages explain each
of the wash options and how to use them.
In the following diagrams:
( ) = light is on
To select wash options
Select wash cycle.
1
Use the up or down arrows, or the options button, to select the wash options you want to use.
2
Press START/PAUSE.
3
Softener/Bleach rinse
Use the SOFTENER/BLEACH RINSE option:
If you use liquid fabric softener.
■ ■
If you use bleach.
■ ■
This option changes the rinse to include a spray and deep
rinse, so that the fabric softener/bleach will be dispensed
correctly, and the machine sump will be thoroughly cleaned
of bleach at the end of the cycle.
Note: we recommend the use of softener dryer sheets
because liquid fabric softener has been known to cause an
unpleasant build-up inside washing machines (refer to 'Scrud'
page 23).
In addition, some wash loads are better washed using a cycle
with a deep rinse. For instance, garments that have a lot of
sand or sawdust in them, or garments where the color still
runs. For these loads select the SOFTENER/BLEACH RINSE
option, as this will change the rinse to include a deep rinse.
Soak
When you select SOAK your Ecosmart™ will stop at the end of
wash and soak for 2 hours before completing the rinse and
spin. During soak your washer will agitate for a few seconds
every minute.
( ) = light is off
Wash cycles and options
Note: two lights are used to indicate warm/hot
and warm/cold wash temperatures.
Fig.18 Selecting wash option
Fig.19 Selecting the SOFTENER/
BLEACH RINSE option
Fig.20 Selecting the SOAK option
US
17
CA